Steriflow Food & Beverage FBCPM Series Sanitary Back-Pressure Regulating Valves

The FB5CPM (inlet) and FB6CPM (outlet) are air loaded sanitary constant pressure modulating valves, designed to allow the user to change set-points remotely via a cabinet or panel mounted air regulator, or through a distributed control system or PLC, using an I-P transducer. 

The CPM valve is an ideal choice for automating and maintaining constant pressure set points on the inlet side of the valve for control operations, whether they are process set points or points to fully open the valve for rinse, CIP or SIP. The valve is preferred in HTST/UHT Pasteurization, after Heat Exchnagers, Separator equipment, bottling lines, etc. 

A wide variety of applivations exist for the FBCPM in the food, beverage, health, beauty and other industries. Processes include but are not limited to: 

  • HTST,UHT Process control 
  • Pump pressure control 
  • Process overpressure control 
  • CIP system pressure control 
  • Pressure bypass control 
 

FBCPM Series

Steriflow Food & Beverage

Features & Benefits:

  • HTST/UHT process control 
  • 3A Approval 53-07
  • Leak detection port 
  • Optional end connections 
  • Lifetime Jorlon diaphragm warranty 
  • Single diaphragm design 
  • Stem guiding above diaphragm
  • Large diaphragm for optimal sensitivity to pressure changes
  • Bolted bonnet
  • Optional seat material for Class Vi shutoff
  • Maximum operating pressure of 200 psi
  • Maximum temperature of 300°F
  • Accessory I/P or self-relieving air regulator available for automated and/or remote set point control

Specifications:

  • Sizes: 3/4″, 1″, 1-1/2″, 2″, 3″ (DN20, DN25, DN40, DN50, DN80)
  • Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 Gr 1.4435, AL-6XN, Hastelloy C-22 and others are optional
  • End Connections: ASME Tri-clamp, others consult factory
  • Seat material: Integral hard seat: 316L (Class IV shutoff); optional seat material: Teflon (not 3A) (Class VI shutoff)
  • Diaphragm material: Jordan (FDA, 3A approved)
Manufacturer
:
Steriflow Food & Beverage

FBCPM Series (FoodandBevCC__1_.pdf, 1,075 Kb) [Download]