Mark 96AA Series Sanitary Pressure Reducing Valves
Features & Benefits:
- Available with extended range I-P transducer or a SST gas regulator
- Fully automated operation when used with I/P. Outlet set point pressure, and operation at full open during Rinse/CIP/Rinse cycle is controlled by PLC or DCS menu
- Automated operation drastically reduces offset (droop) compared with spring loaded regulators
- MK95, air-loaded design significantly reduces size and weight
- Optimized diaphragm material, surface area and support system for unsurpassed performance and life
Specifications:
- Size: 3/4″, 1″, 1-1/2″, 2″, 3″ (DN20, DN25, DN40, DN50, DN80)
- End Connections: ASME, Tri-Clamp, ASME Butt Weld, ASME Tube Weld, DIN/ISO Tri-Clamp and Tube Weld
- Cv & Flow Characteristic: 1.5 – 23 Cv (1,3 – 19,8 Kv), model dependent
- Max Pressure/Temperature: model dependent
- Setpoint Range: 3 psi (0,2 bar) to 135 psi (9,3); dependent on size and construction
- Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 GR 1.4435, AL-6XN®, Hastelloy C-22 and others are optional
- Surface Finish: ASME BPE SF5, 20Ra (0,5µm) electropolish is standard, 8Ra (0,2µm) optional
- Stem Seal- Diaphragm: Jorlon FDA, USP Class VI
- Soft Seat Option: Selection is size and Cv dependent; Jorlon, PEEK, Teflon (all materials to FDA & USP Class VI)
Facebook
Instagram